What Is Spirulina Powder? Protein Content, Grades, and Applications

A buyer’s guide for procurement teams, brand owners, and formulators who need to compare spirulina powder on facts, not colour.

Two drums sit side by side in a warehouse. Both are labelled spirulina powder. Both claim 60% protein. One smells grassy and fresh. The other smells like a pond that has been sitting too long, and its colour has gone dull olive.

That gap is the whole problem with this ingredient. Spirulina is a whole-cell biomass, not a purified chemical. Its protein, colour, and safety markers move with the harvest, the drying method, and the pond it grew in. A price per kilo tells you nothing about which drum you are buying.

Most supplier pages list the same three numbers: protein, phycocyanin, moisture. Those numbers hide the decisions that actually matter, such as assay method, mesh size, and how the batch was tested for microcystins.

In this post, you’ll learn what spirulina powder really is, how the main grades differ, how to read a certificate of analysis line by line, and which checks to run before you place a bulk order.

Quick answer: Spirulina powder is the dried, milled biomass of Arthrospira platensis, a blue-green cyanobacterium grown in shallow ponds. A standard food-grade powder carries 55–70% protein, 8–19% crude phycocyanin, 11–14 mg/g chlorophyll, and 4–5.5 mg/g carotenoids. It is sold as a whole-cell ingredient, a cell-broken powder, or a purified phycocyanin extract for colour. Buyers should choose a grade by application first, then verify the batch on protein, phycocyanin, heavy metals, PAH4, aflatoxin, and microcystin results. Colour and smell are useful first screens. They are not specifications.

What Is Spirulina Powder, Exactly?

Spirulina powder starts as Arthrospira platensis, a cyanobacterium. It is often called blue-green algae, yet it is not a true alga and not a seaweed. The cells form spiral filaments, which is where the old name Spirulina came from.

Farmers grow it in shallow, alkaline water, usually between pH 9 and 11. That high pH keeps most competing organisms out. Open raceway ponds with paddle wheels are the common system. Closed photobioreactors cost more, but they cut the risk of dust, bird droppings, and stray cyanobacteria.

At harvest, the biomass is screened, washed, and dewatered. Then it is dried and milled. Most food-grade powder passes 80 mesh. Finer grades reach 100 or 120 mesh for capsule filling and drink mixes.

Because the whole cell is dried, you buy the entire organism. You get protein, pigments, lipids, minerals, and fibre in one material. That is the main difference from an isolate such as pea protein or whey.

It also explains batch variation. Protein and phycocyanin rise and fall with light, nitrogen, water temperature, and harvest timing. Two suppliers can both print “60% protein” and still ship noticeably different material.

One more point catches new buyers. A 60% protein powder is not 60% pure protein. The rest is carbohydrate, ash, fibre, fat, and moisture. Formulators need to allow for that when they calculate a protein claim per serving.

What Is Actually in the Powder: Protein, Phycocyanin, and the Rest

Protein is the headline number. Labs measure it by Kjeldahl nitrogen times 6.25, following methods such as GB 5009.5. Always check whether the figure is on a dry basis or as-is. At 7% moisture, a 60% as-is result equals about 64.5% dry basis. That gap is enough to fail a label claim.

The amino acid profile is broad. Spirulina carries all nine essential amino acids. Methionine and cysteine are first limiting, so blends with soy or whey usually score better than spirulina alone on PDCAAS.

Phycocyanin is the blue pigment-protein that buyers watch next. Food-grade powder typically holds 8–19% crude phycocyanin, read by UV spectrophotometry at 620 nm. Crude extract still contains other proteins and pigments. Purified C-phycocyanin is a different product, often above 90% with a purity ratio (A620/A280) of 3.5–4.0.

Do not compare a crude 12–19% figure with a supplier’s “≥15% phycocyanin” claim until you know the method. HPLC, UV, and dry-basis calculations give different answers.

Chlorophyll and carotenoids set the visual tone. Expect 11–14 mg/g chlorophyll and 4.0–5.5 mg/g carotenoids in a good batch. Both fall during long storage or hot drying, which is why old stock looks olive instead of deep green.

Two claims need care. Spirulina iron is genuinely high, around 28–50 mg per 100 g. Its vitamin B12, however, is mostly pseudocobalamin, which humans cannot use well. Avoid B12 claims on a spirulina-only product.

MarkerTypical food-grade rangeWhat it tells youCommon method
Białko55–70%label claim, blend economicsKjeldahl, N × 6.25
Crude phycocyanin8–19%colour strength, pigment valueUV-Vis at 620 nm
Chlorofil8–15 mg/ggreen tone, freshnessSpectrophotometry
Carotenoids3–6 mg/gcolour and oxidative stabilityUV-Vis
Wilgotność≤7–8%shelf life, caking riskOven or Karl Fischer
Popiół≤8–9%mineral load, pond residueMuffle furnace
GLA0.3–1.0%premium fatty acid claimGC-FID

Whole Cell, Broken Cell, or Blue? Choosing the Right Grade

Three grades cover most of the market, and they are not interchangeable.

Whole-cell powder is the standard product. The biomass is dried and milled with the cell walls intact. It carries the full nutrient matrix and costs the least per kilo. Digestibility sits around 83–90%, which is decent for a plant material.

Broken-cell powder goes through mechanical shear, high-pressure homogenisation, or bead milling. Suppliers usually quote a breakage rate, often 70% or 90%. Breaking the wall releases phycocyanin and lipids, so the powder disperses faster and reads stronger in colour. It also absorbs water more readily, which helps in drink mixes and softgels.

The trade-off is stability. Broken cells expose pigments to oxygen, so the powder needs nitrogen flushing and a tight seal. Expect a higher price too.

Blue spirulina is not a grade of green powder. It is a phycocyanin extract, sold by colour value such as E18, E25, or E40. Those numbers come from absorbance readings. E40 is roughly twice as concentrated as E18, so price per kilo should be read against colour strength, not weight.

This extract is water soluble, almost tasteless, and free of chlorophyll. Food teams use it at 0.05–0.2% to colour gummies, ice cream, and drinks. It offers little protein, so it cannot support a protein claim. It also fades below pH 4 and fades faster with heat, which matters in acidic beverages and baked goods.

OcenaBiałkoPhycocyaninBest forWatch-outs
Whole cell55–70%8–15% crudetablets, blends, bars, feedslower dispersion, earthy taste
Broken cell55–70%12–19% crudedrinks, softgels, instant mixesoxidation, higher cost
Blue extract<20%90%+ C-PCcolour in beverages, confectionerypH < 4 fade, no protein claim
Four spoons holding green powders of different shades
Figure 1. Tone is a fast screen, not a grade. Fresh spirulina reads deep blue-green; lighter olive tones often mean other algae or aged stock.

Reading a Spirulina COA: The Six Tests That Decide a Batch

A certificate of analysis is only useful if you read it the way a lab does. Six groups matter most.

1. Protein and pigment. Confirm the basis (dry or as-is) and the method. Protein by Kjeldahl and crude phycocyanin by UV at 620 nm are the usual pair. If a supplier quotes phycocyanin without a method, ask for it.

2. Moisture and ash. Moisture above 8% invites caking and mould. High ash can point to soil or salt carryover from the pond.

3. Heavy metals. Lead, inorganic arsenic, cadmium, and mercury should each have a number, not a tick box. For reference, the US colour-additive rule for spirulina extract caps lead at 0.2 ppm, arsenic at 0.3 ppm, mercury at 0.1 ppm, and cadmium at 0.3 ppm (21 CFR 73.530).

4. PAH4 and benzo(a)pyrene. These come from drying with combustion gases and from contaminated inputs. EU Regulation 2015/1933 sets maximum levels for polycyclic aromatic hydrocarbons in spirulina food supplements, and European buyers now expect PAH4 data by default.

5. Aflatoxins and microbiology. Aflatoxin limits protect you against poor storage. Total plate count, coliforms, Salmonella, E. coli, oraz S. aureus results show whether the dryer and packing line are under control.

6. Microcystins. Pure spirulina does not make these toxins. They arrive with other cyanobacteria in open ponds, often via bird droppings. The EU has no harmonised limit, so many buyers use the US guideline of 1 µg/g and simply require “negative” on each batch. Ask for that line even when a spec sheet omits it.

A typical export-grade specification looks like this:

PrzedmiotSpecyfikacjaMetoda
Białko≥60%GB 5009.5 (Kjeldahl)
Crude phycocyanin12–19%UV-Vis at 620 nm
Chlorofil11–14 mg/gSN/T 1113
Carotenoids4.0–5.5 mg/gDB53/T 186
Moisture / ash≤7.0% / ≤8.0%GB 5009.3 / 5009.4
Wielkość cząstek100% przez 80 meshAOAC 973.03
Gęstość objętościowa0.40–0.70 g/mlUSP
Lead / inorganic arsenic≤0.5 ppm eachGB 5009.12 / 5009.11
Cadmium / mercury≤0.1 ppm eachGB 5009.15 / 5009.17
PAH4 / benzo(a)pyrene<50 ppb / <5 ppbGC-MS
Aflatoksyny≤20 ppbGB 5009.22
MicrobiologicalTPC ≤100,000 CFU/g; coliform <10; pathogens negativeGB 4789 series

Read the numbers against your market, not against the prettiest PDF. A batch that clears EU PAH limits may still fail a customer’s tighter internal lead limit, and vice versa.

Spray Dried or Freeze Dried? How Drying Changes the Specification

Drying is where a lot of phycocyanin quietly disappears. Heat and oxygen break the pigment-protein bond, and the powder turns from deep blue-green to olive.

Spray drying is the workhorse. The biomass is atomised into hot air, with inlet temperatures around 160–200 °C and outlet temperatures near 70–90 °C. Residence time is short, seconds rather than hours. Even so, a hot outlet can cost you a meaningful share of phycocyanin and carotenoids.

Freeze drying removes water by sublimation under vacuum. It preserves phycocyanin and beta-carotene better than any other method, and the powder usually looks more vivid. The cost is several times higher per kilo, and the output is lighter and fluffier, which changes bulk density and packaging volume.

Some suppliers advertise “low-temperature spray drying at ≤50 °C”. Read the whole sentence. It usually refers to the outlet or chamber temperature, not the inlet, and it says nothing about residence time or losses.

Match the process to the job. Colour-critical products, such as blue extract or premium green blends, justify freeze drying. Tablets and capsules are fine with spray-dried 80–120 mesh powder, which flows well on a press. Drink mixes often do best with broken-cell spray-dried powder, because it wets out faster.

Storage decides how much of that quality survives. Keep the drum sealed, below 25 °C, and away from light. Above 30 °C, or in humid air, colour and pigment assays drift. A 24-month shelf life is realistic under those conditions, and much shorter without them.

Where Spirulina Powder Fits: Applications and Realistic Inclusion Rates

Spirulina shows up in six main product types, and each one wants a different specification.

Tablets and capsules use 80–120 mesh whole-cell powder. A 500 mg tablet delivers about 300 mg of protein, which looks strong on a label. The catch is dose size: consumers need three to six tablets to reach 2–3 g of spirulina. Fine powder flows better on a press, but it also stains tooling and needs careful cleaning between products.

Green blends and smoothie powders use 3–5 g per serving, often with chlorella, wheatgrass, or matcha. Broken-cell powder disperses faster and feels less gritty. Flavour is the real constraint, so most brands mask it with fruit or mint.

Bars and baked goods take 1–3% by weight for colour and a small protein lift. Heat is the enemy here. Colour fades in the oven, so some bakeries add spirulina to the coating or dust it on after baking.

Ready-to-drink beverages need 0.1–0.3% broken-cell powder, plus a plan for settling. Blue extract is different: 0.05–0.2% gives a clean blue in neutral or mildly acidic systems. Below pH 4, the colour shifts and fades.

Pet and aquaculture feed use 0.5–2% for pigmentation and palatability. Ornamental fish and shrimp farmers buy it for colour, and poultry producers use it for yolk tone.

ApplicationTypical inclusionBest gradeClaim or process watch-out
Tablets / capsules2–3 g per daily dosewhole cell, 80–120 meshtablet count, tooling stains
Green blends3–5 g per servingbroken celltaste masking, dispersion
Bars / bakery1–3%whole cellcolour loss in oven
RTD beverages0.1–0.3%broken cellsettling, pH stability
Blue colour0.05–0.2%phycocyanin extractfades below pH 4
Pet / aqua feed0.5–2%whole cellAAFCO and pigment claims
Spirulina powder in a glass bowl with capsules and a wooden spoon
Figure 2. The same lot has to work in a bulk blend and in a finished capsule. Mesh, bulk density, and colour all carry through to the dose.

Buying Spirulina in Bulk: Supplier Vetting, MOQ, and Packaging

Price per kilo is the last thing to compare, not the first. Six checks separate a reliable supplier from a reseller with a nice website.

CheckWhat to ask forRed flag
Cultivation controlpond or bioreactor, water source, site photosvague “natural source” answers
Toxin testingmicrocystin result per batch, third-party lab“we test annually”
Contaminantsheavy metals, PAH4, aflatoxin, microbiologytick boxes with no numbers
Method disclosureprotein basis, phycocyanin method, meshround numbers with no method
Certification scopewhich product and line the organic certificate coverscertificate for a different site
Traceabilitypond or lot ID, harvest date, retention sampleno lot code on the drum

Ask for a 50–100 g sample with its batch COA before you commit. Reputable suppliers send one against shipping cost. Test the sample for mesh, colour, smell, and dispersion. Then send a second sample to your own lab if the order is large.

Standard export packing is a 25 kg fibre drum with a double PE liner, often nitrogen flushed. Smaller lots ship in 1–5 kg foil bags. Confirm the liner gauge and whether the drum is food-grade, because a cheap liner can transfer odour.

Bulk density deserves more attention than it gets. At 0.40–0.70 g/ml, one tonne of powder occupies roughly 1.4–2.5 m³. Two suppliers quoting the same price can land at very different freight costs per kilo, simply because one powder is fluffier. Ask for bulk density before you book a container.

MOQ is usually one drum, and lead time runs one to three weeks depending on grade and paperwork.

Honry Chemical supplies spirulina powder 60% protein at 80 mesh with a full COA covering PAH4, aflatoxin, heavy metals, and microbiology. It sits alongside other białka roślinne in our range. Contact our team for a sample, a specification sheet, or help matching a grade to your formulation.

Common Quality Failures Buyers Catch Too Late

Most spirulina complaints surface after the drums have landed. These six are worth designing out.

Caking. Powder that arrives in hard lumps usually picked up moisture in transit or sat in a warm container. A cheap liner or a broken seal is often the cause. Lumps do not break up in a blender the way free powder does.

Colour fade. Olive-toned powder may still pass a protein test. Consumers judge colour long before they read a COA, so a faded batch can damage a brand even when the numbers look fine.

Mesh mismatch. Coarse powder causes weight variation on a capsule press. Very fine powder flows poorly, generates dust, and clogs filters. Specify a range, not just a maximum.

Protein basis mismatch. A 60% as-is result is roughly 64.5% dry basis. If your label claim was built on the wrong basis, you can miss it by several points.

Phycocyanin method mismatch. Crude UV readings and HPLC results are not comparable. Marketing claims built on the higher number can fail a customer audit.

Contamination found late. Microcystins and PAHs rarely show up in routine incoming checks. They show up when a retailer tests the finished product.

Build three clauses into the purchase order: a COA per batch, a retention sample held for twelve months, and a recheck window of fourteen days after arrival.

FAQ

Is spirulina powder a complete protein?

Yes, it contains all nine essential amino acids. Methionine and cysteine are low, so it is usually blended with soy, pea, or whey to improve the overall score. A 60% protein powder also contains carbohydrate, ash, and fibre, so read the protein figure as part of the whole matrix rather than as purity.

How much spirulina powder is used per day?

Clinical studies most often use 2–5 g per day, with some going up to 8 g. Supplement brands usually build a 2–3 g daily dose into tablets or capsules. Food applications are smaller, often 0.1–3% of the finished product. Higher intakes are not automatically better, and anyone on blood thinners or with an autoimmune condition should ask a doctor first.

What is the difference between blue spirulina and green spirulina powder?

Green powder is the whole dried biomass, rich in protein, chlorophyll, and minerals. Blue spirulina is a purified phycocyanin extract used mainly as a colourant. It is water soluble, nearly tasteless, and carries little protein. Blue grades are sold by colour value such as E18 or E40, so compare them on colour strength rather than price per kilo.

How do I check spirulina powder for heavy metals and microcystins?

Ask for a batch COA with numeric results for lead, arsenic, cadmium, and mercury, plus a microcystin line. Send a sample to your own lab for the first order. The US colour-additive rule for spirulina extract caps lead at 0.2 ppm and requires a negative microcystin result, which is a practical benchmark. Repeat the test when you change supplier or pond source.

Does spirulina powder lose nutrients during drying or storage?

Yes. Phycocyanin and carotenoids are heat and oxygen sensitive. High-temperature drying, light exposure, and warm storage all reduce them, and colour fades before protein does. Freeze drying retains the most pigment. Keep drums sealed below 25 °C, away from light, and expect a 24-month shelf life under those conditions.

Wnioski

Spirulina powder is a whole-cell ingredient, so its value sits in the detail: protein basis, phycocyanin method, grade, mesh, and a batch COA that answers the hard questions. Pick the grade your application needs, verify the numbers before the container ships, and hold a retention sample. Buyers who do that rarely get surprised by a drum.